Opatrenia na inštaláciu vodotesných spojov priemyselných riadiacich káblov sú nasledovné:
1. Before installing the industrial control cable waterproof connector, be sure to read the manufacturer's product manual carefully. This is especially important for 10KV and above cables. Think about all the processes before doing it.
2. Do not use too much force when pressing the copper pipe, as long as it is crimped in place, the copper end face after crimping is bound to have many raised points, this must be flattened with a file, and no burrs should be left.
3. The outer semiconductor shield is a semi-conductive material that acts as a uniform electric field outside the insulation of the cable and the joint. Like the inner semiconductor shield, it plays a very important role in the cable and the joint.
4. When making the joint, the inner shielding layer of the joint of the conductor part of the crimping tube must be restored, and a part of the inner semiconductor shield of the cable must be reserved, so that the inner shielding of the connector on the connecting tube can communicate with each other.
Stručne povedané, počas inštalácie vodotesných konektorov priemyselných riadiacich káblov bude vykonaných veľa opatrení. Preto je najlepšie, aby si konštruktér aj používateľ pozorne prečítali výrobnú príručku a ubezpečili sa, že nie sú v procese čítania. Problémy, ktorým rozumiete, sú nastolené, aby ste ich včas vyriešili, aby ste sa do určitej miery vyhli nebezpečenstvu.
